Shop
Best Seller Items
-
8mm Staple Pins for staple gun (universal)
- High quality staple pins ,
- Universal for stable guns
- 1000 pieces in box
- Good penetration 8mm depth
- Recommended for staple guns
KShs200.00 Inc.Vat8mm Staple Pins for staple gun (universal)
KShs200.00 Inc.Vat -
12mm Staple Pins for staple guns (universal)
- High quality staple pins ,
- Universal for stable guns
- 1000 pieces in box
- Good penetration 12mm depth
- Recommended for staple guns
KShs270.00 Inc.Vat12mm Staple Pins for staple guns (universal)
KShs270.00 Inc.Vat -
Gasoline Concrete Vibrator (Hex type)
Highlights
Engine:Honda GX160
Engine power:4.0Kw(5.5HP)
Weight:31Kgs
HEX type coupling
Not included vibrator poker
Packed by carton box -
3PCS STEEL FILE SET
Highlights
Size:8“/200mm
T12 Steel
Flat steel file 1pcs
Round steel file 1pcs
Half round steel file 1pcs
Packed by double blister -
CORDLESS DRILL
Highlights
Drill volts:18V
No load speed:0-550rpm
Chuck:10mm keyless chuck
Torque settings:15+1
Light weight design
Including 2pcs battery pack
Including 1pcs 3-5Hr charger
Charger Volts:220-240V~50Hz
Packed in color box -
BENCH GRINDER 1
Highlights
Voltage: 220-240V~50Hz
Input power:350W
No load speed:2950rpm
Wheel size:150 mm
Work light for automatic illuminate your work area
Ball bearing support motor shaft
Including 1 set eye shield
Including 1pc work light
-
1/2 inch EXTENSION BAR Length 10 Inches
Highlights
1/2inch Extension bar, Lenght 10 inches(254mm)
Material:40Cr,Heat treatment,chromed plated
Packed by plastic hangerKShs780.00 Inc.Vat1/2 inch EXTENSION BAR Length 10 Inches
KShs780.00 Inc.Vat -
1/2 Inch EXTENSION BAR Length 5 inches (12.7cm)
Highlights
“1/2″”Extension bar,10″”(254mm)
Material:40Cr,Heat treatment,chromed plated
Packed by plastic hanger”KShs400.00 Inc.Vat1/2 Inch EXTENSION BAR Length 5 inches (12.7cm)
KShs400.00 Inc.Vat -
1/2 inch HEXAGONAL SOCKET 8mm
Highlights
Half-inch .6pointt. hexagonal socket, Size 8MM
Material:50BV30,Heat treatment,black nickel plated
Packed by plastic hanger”KShs200.00 Inc.Vat1/2 inch HEXAGONAL SOCKET 8mm
KShs200.00 Inc.Vat -
1/2 Inch L handle 300mm HLHD12121
Highlights
1/2 inch L handle, Material:50bv30,
Heat treatment, chromed plated
Lenght 300mm ,Packed by plastic hanger
KShs1,290.00 Inc.Vat1/2 Inch L handle 300mm HLHD12121
KShs1,290.00 Inc.Vat -
1/2 Inch T handle 250mm HSTB12101
Highlights
1/2 inch T sliding Handle
Material:50bv30, Heat treatment,
chromed plated, Length 250mm
Packed by plastic hanger
KShs1,550.00 Inc.Vat1/2 Inch T handle 250mm HSTB12101
KShs1,550.00 Inc.Vat -
1/2″ AIR RATCHET WRENCH
Highlights
“Front Exhaust
Square Drive: 1/2″”
Capacity Bolt Size:1/2″”(13mm)
Free Speed RPM :160
Max. Torque :50Ft-Lb(68N.M)
Air Inlet (NPT) : 1/4″”
Air Hose(ID) : 3/8″”
Air Cons:3cfm(85.5/min)
Packed in color box” -
1/2″ RATCHET WRENCH
Highlights
Size:1/2″ 72T
Length:260mm
Material : CR-V+Cr-Mo
Packed by plastic hanger -
1/2″ RATCHET WRENCH
Highlights
Size:1/2″ 45T
Length:260mm
Material : CR-V+Cr-Mo
Packed by plastic hanger -
1/2″ REVERSIBLE AIR DRILL
Highlights
“Free speed :1800rpm
Air Consumption:
4cfm 114L/min
Spindle Thread:3-8″”-24UNF
Chuck capacity:1/2″” 13mm
Length : 8.1″” 207mm
Weight:2.4lbs 1.1kgs
Air pressure:90psi,6.2bar
Air Inlet:1/4″”
Packed in color box” -
1″ AIR IMPACT WRENCH
- “Square Drive:1″”
- Anvil:8″”(200mm)
- Air Consumption:
- 36cfm 1019l/min
- Capacity Bolt Size:1-3/4″”(45mm)
- Free Speed: 3900RPM
- Max.torque:
- 1600Ft-Lb;2200N.m
- Air Inlet (NPT) : 1/2″”
- Air Hose(ID) : 1/2″”
- Sug.Air Comp.(HP):5
- Packed by blow mould case”
-
101PCS TOOLS SET(INDUSTRIAL TYPE)
Highlights
101 Pcs Tools Set , INDUSTRIAL TYPE
1 Pcs 850W Impact Drill
220-240V/50Hz,13mm key chuck
1 Pcs 8Oz Claw Hammer
1 Pcs SL5.5*100 Screwdriver
1 Pcs PH1*100 Screwdriver
1 Pcs 6″ Combination Pliers
1 Pcs 6″ Adjustable Wrench
1 Pcs Mini Spirit level
1 Pcs 3M Steel measuring tape
1 Pcs Snap-off blade knife
5 Pcs Twist Drill bits 2,3,4,5,6mm
5 Pcs Masonry Drill bits 4,5,6,8,10mm
4 Pcs Wood Drill bits 4,5,6,8mm
6 Pcs 1/4″ Hexagonal Socket 5mm 6mm 8mm 9mm 10mm 11mm
1 Pcs 4-6mm(25mm) socket adaptor
10 Pcs Screwdriver bits PH1,PH2,PZ1,PZ2,SL4,SL6,Hex4,Hex5,T20,T25
1 Pcs Magnetic bits holder
30Pcs screws(10pcs*ST3.5,10pcs*ST4,10pcs*ST5)
30Pcs Plastic plugs(10pcs*5mm,10pcs*6mm,10pcs*8mm)
Packed by INGCO Style BMC + Color boxKShs22,500.00 Inc.Vat101PCS TOOLS SET(INDUSTRIAL TYPE)
KShs22,500.00 Inc.Vat
